Showing all 10 results

Ideal 61-657 Voltage Detector 12-1000v with Torch

$66.00 inc. GST

UL Certified CAT IV 1000V AC, 12-1000 V AC Low Range, 50 to 1000 V AC High Range
Senses 2 voltage ranges 12 to 1000V AC (Low ) or 50 to 1000V AC (High) allowing detection of low voltages (doorbells, thermostats, irrigation wiring, etc.) and standard voltage in tamper-resistant outlets when the tip is located near the Hot receptacle and/or Hot Connection point on the outlet.
Dust Tight and Water proof (1 m for 30 minutes) Industrial Design makes this tester easy to grip and capable of sustaining a drop from 6.5 ft (2 m).
An LED Flashlight in the tip operates independently of the tester functions and can be used to illuminate the work area. Press the Flashlight Button to turn it On/Off. The tester is set to Flashlight Off. The Flashlight will Auto Power Off after 5 minutes.
Audible Notification Disable – The tester can be operated with a visual only indication of voltage when working in noise sensitive/noise restricted area with the simple press of a speaker button.
Auto Power Off – After 10 minutes of inactivity (no button pressed and no signals detected), the tester will emit one long beep (~0.5s) and then shut off. Note: if the flashlight is on, it will be also shut off.
Low Battery Indication – If battery voltage is less than around 2.4V, the green led in the tip will flash 3 times and the buzzer will send out one long beep, then turn off the device.

Klein Tools 50 – 1000 Volt AC Non Contact Voltage Tester NCVT-1P

$37.35 inc. GST

Non-contact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, electrical sockets and wires.

High-intensity, bright-green LED indicates that the tester is operational and aids in illuminating the work space.

When voltage is detected, a high-intensity, bright-red LED illuminates and a warning tone sounds

Discreet digitally controlled ON/OFF power button

Auto power-off feature conserves and extends battery life

Microprocessor-controlled low-battery indicator and tester shut-down

50 to 1000 Volt AC power operating range allows broad application

CAT IV 1,000-Volt safety rating provides expanded operation and protection

Durable polycarbonate plastic-resin construction

Lightweight compact design with a convenient clip to fit securely in your pocket

Klein Tools NVCT-3 Non-Contact Voltage Tester 12-1000V With Torch

$29.95 inc. GST
  • Provides non-contact detection of an AC voltage
  • Detects 12 to 1000V AC with simultaneous visual and audible voltage indicators
  • Bright torch illuminates work area and may be used independently of voltage detection function
  • Visual LED bar graph indicates the presence of voltage – the higher the voltage sensed, or the closer to the voltage source, the more LEDs light up
  • Bar graph visual voltage indicator uses up to five vibrant LEDs for easy interpretation/viewing

Klein Tools NVCT-3P Non-Contact Voltage Tester 12-1000V With Torch

$47.85 inc. GST

Non-contact voltage tester’s dual-range detects from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
Detects voltage with simultaneous visual and audible voltage indicators
Bright torch illuminates work area and may be used independently of voltage detection function
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000 V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6′ (2 m) drop protection
IP67: Dust-proof and waterproof

Klein Voltage Tester with Laser Distance Measurer NCVT-6

$119.90 inc. GST
  • Volt Pen detects AC voltage from 12 to 1000 V with visual and audible indicators
  • Incorporates a 66-foot (20 m) Laser Distance Meter that can measure in meters, inches in fractions or decimals, and feet in fractions or decimals, with accuracy up to 1/16-inch (0.16 cm)

Kyoritsu 5711 Voltage Tester

$54.95 inc. GST
  • Audible buzzer & visual red LED indicates presence of AC voltage
  • Auto check function for battery and internal circuit
  • Dual sensitivity Low(Lo) sensitivity helps to recognise the Phase from Neutral in sockets. High(Hi) sensitivity for checking the presence of voltage from a further distance.
  • Self-function test The 5711 performs self-function test when the button is pressed. If abnormality is found during the test, it gives 3 short beeps, 3 long beeps, 3 short beeps
  • Bright white LED light integrated into the tip
  • Safety Standard – IEC 61010-1 CATIV W 600V / CATIII 1000V Pollution degree 2

Major Tech MT400 600V AC NCV Detector

$15.95 inc. GST

CAT III 600V and CAT II 1000V
50V to 600V AC
Indicates if voltage is present at plug sockets and light switches
Ideal for industrial uses such as checking voltage on earth leakages, breakers, fuses and contactors
Ideal for checking breaks in wires and cables
Ideal for checking that plug sockets and light switches are earthed
Indicates exactly where the €œLIVE€ phase has broken

TEKTROM NCVT10 Voltage Detector Tester Pen 1000v

$9.95 inc. GST

The TEKTROM NCVT10 is a trade quality voltage detector.

1. Zero fire wire identification

2. Checking the breakpoint

3. Contactless safety test

4. lighting flashlight

5. Easy to carry anywhere

6. Sensitivity switch: high low sensitivity switch

7. automatic shutdown

8. Power supply: 2 x 1.5V AAA batteries (not included)

Weidmuller Volt Tester VTCL 2436660000

$34.00 inc. GST

Automatic testing, identification and display of voltage.
Large voltage range