Fluke 116 Offers
- Built-in thermometer
- Provides microamps to test flame sensors
- Low input impedance to helps prevent false readings due to ghost voltage
- Large white LED backlight for working in poorly lit areas
- Measures resistance, continuity, frequency, and capacitance
- Provides Min/Max/Average to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Fits into optional ToolPak™ magnetic hanger for hands-free operation (sold separately)
- CAT III 600 V safety rated
Fluke 62 MAX Plus Infrared Thermometer
Infrared thermometers are everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance.
If you’ve ever used an infrared thermometer, then you may have been fooled regarding the temperature reading. That’s because IR thermometers project a measurement cone at a surface and take the average temperature of the cone at the target. Although most IR thermometers have a laser pointer, a laser is a line, not a cone, and you may think that you’re getting temperature at the laser point only. It uses two rotating laser pointers that show you the size of the measurement area. It covers the temperature range from -22 to 1202°F (-30 to 650°C) with a response time less than 300 ms. The meters screen is located in a position and with a viewing angle (15°) that, in many cases, lets you see the display without having to move the thermometer from the measuring point. For most measurements, you simply pull the trigger once you’ve identified the measurement point.
- Dust and water-resistant: IP54 rated for dust and water resistance
- Drop tested: Rugged enough to survive a 9.8′ (3 m) drop for your most harsh working environments
- Ergonomically designed for a more natural hand fit
- Small and lightweight: It clips to your tool belt or belt loop or easily fits into your tool box
- Distance to spot: Precise laser technology makes for more accurate and repeatable measurements
- Large, backlit display: Large screen makes data easier to read, even in dark areas
- Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements
- Alarm: Hi and Lo alarms for rapid display of measurements outside the limits
- Power: Powered by a single, standard AA battery
Why IR Thermometers?
Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC/R system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.
- Building automation
- Military and aerospace
- Maintenance and repair
Fluke TL75 Hard Point™ Test Lead Set
- One pair (red, black) of comfort grip probes
- 48″ (1.22 m) PVC insulated test leads with right-angle shrouded banana plugs
- Recommended for general purpose measurements
- CAT II 1000 V, , 10 A rating
- CAT IV 600 V, CAT III 1000 V only with protective cap
- CSA listed
Fluke 80BK-A Integrated DMM Temperature Probe
- Standard shrouded banana jack
- Convenient one piece construction
Fluke 80AK-A Thermocouple Adapter
- Low voltage (below 30 V AC, 60 V DC)
Fluke 80PK-11 Type-K Velcro Thermocouple Temperature Probe
Designed to be compatible with any temperature measuring instrument that accepts Type-K thermocouples, has a miniature thermocouple connector, and has cold reference junction compensation. Designed for hands free measurement of HVAC/R temperature measuring applications. Use multiple probes and leave in place for route based routine maintenance.