Cutting Capacity (Hard Wire/Φmm): 3 Cutting Capacity (Piano Wire/Φmm): 2.5 Cutting Capacity (Copper/Aluminum Cable/Φmm): 14 Cutting Capacity (Copper/Aluminum Cable/mm2): 25 Head Finishing: Chromium Plating Handlebar Specification: 1000V Insulation (VDE Insulation Tested) Length (mm): 225 Weight (g): 405
The Strong Type Pliers that demonstrate this principle to the maximum Large limit.The 35% burden is reduced from the STD Type by the unique LeverDesign.The gripping surface is a shape corresponding to the board and Pipe and it can be used for a wide range of applications. In the Side cutter, it is possible to cut soft wire · hard wire · Piano wire and cut longer cable by a longer Side cutter.The hardness of Cutter part subjected to elaborate quenching treatment is about HRC 64. Handlebar 1000 V insulation . The 1000V insulation Handlebar made of two kinds of Materials is differentiated from the non-insulated tool by adopting Red and Yellow Two-tone color. Ideal for harsh use. By the unique LeverDesign which demonstrates this principle to the maximum Large limit, the burden of 35% less than the STD Type is reduced. The gripping surface corresponds to a plate or Pipe and can be used in a wide range of applications. In Side cutter, it is possible to cut soft wire · hard wire · Piano wire. It is also possible to cut a thick Cable with a longer Side cutter. The hardness of the Cutter part subjected to elaborate quenching treatment is about HRC 64. Material is Oil high-grade Special Tool steel quenched by tempering. KNIPEX’s Strong Type Pliers are Joint parts (fulcrum) Since it is arranged at the optimum Point, it is possible to perform work such as cutting, grasping, and bending with little power. When cutting a hard wire with a diameter of 2mm, normal pliers (180mm) In 486N (48.6kp) Where you need the power of Strong Type Pliers (Same size) Using only 318 N (31.8kp) You can cut it with the power of.
Made in Germany